MOSFET Subthreshold Compact
Modeling with Effective Gate Overdrive
Khee Yong Lim,
Member, IEEE, and Xing Zhou,
Senior
Member, IEEE
IEEE Transactions on Electron Devices,
Vol. 49, No. 1, pp. 196-199, January 2002.
(Manuscript received May 1, 2001; revised July
30, 2001)
Copyright | Abstract
| References | Citation | Figures
| Reprint
| Back
Copyright Notice
© 2002 IEEE. Personal use of this material is permitted. However,
permission to reprint/republish this material for advertising or promotional
purposes or for creating new collective works for resale or redistribution
to servers or lists, or to reuse any copyrighted component of this work
in other works must be obtained from the IEEE.
Abstract
In this brief, previously-proposed one-region MOSFET drain current (Ids)
model is improved in the subthreshold modeling. The compact model
is derived based on first-principle drift-diffusion formulation with the
correct drift and diffusion currents in strong inversion and subthreshold,
respectively. The new model has only one fitting parameter for subthreshold
slope and can ensure excellent continuity with smooth transition from subthreshold
to strong-inversion regimes, including the moderate-inversion region of
growing importance for low-voltage and low-power circuits.
References
-
[1] B. J. Sheu, D. L. Scharfetter, P. K. Ko, and M. C. Jeng, “BSIM: Berkely
short-channel IGFET model for MOS transistors,” IEEE J. Solid-State Circuits,
vol. SC-22, pp. 558–565, 1987.
-
[2] Y. Cheng, M.-C. Jeng, Z. Liu, J. Huang, M. Chan, K. Chen, P. K. Ko,
and C. Hu, “A physical and scalable I-V model in BSIM3v3 for analog/digital
circuit simulation,” IEEE Trans. Electron Devices, vol. 44, pp. 277–287,
Feb. 1997.
-
[3] Y. Cheng, et al., BSIM3v3 Manual, CA: UC Berkeley, 1997–1998.
-
[4] Y. Cheng, K. Chen, K. Imai, and C. Hu, “A unified MOSFET channel charge
model for device modeling in circuit simulation,” IEEE Trans. Computer-Aided
Design, vol. 17, pp. 641–644, Aug. 1998.
-
[5] X. Zhou and K. Y. Lim, “Unified MOSFET compact I-V model formulation
through physics-based effective transformation,” IEEE Trans. Electron Devices,
vol. 48, pp. 887–896, May 2001.
-
[6] Y. P. Tsividis, Operation and Modeling of the MOS Transistor, New York:
McGraw-Hill, 1987.
-
[7] K. Y. Lim, “Design, modeling, and characterization of submicron MOSFETs,”
Ph.D. dissertation, Nanyang Technological Univ., Singapore, 2001.
-
[8] P. K. Ko, VLSI Electronics: Microstructure Science, New York: Academic,
1988, vol. 18, ch. 1.
Citation
-
[13] X. Zhou, S. B. Chiah, K.
Y. Lim, Y. Wang, X. Yu, S. Chwa, A. See, and L. Chan, "Technology-dependent
modeling of deep-submicron MOSFET's and ULSI circuits," (Invited Paper),
Proc. 6th International Conference on Solid-State and Integrated-Circuit
Technology (ICSICT-2001), Shanghai, Oct. 2001, Vol. 2, pp. 855-860.
-
[15] X. Zhou and K. Y. Lim, "De-embedding
length-dependent edge-leakage current in shallow trench isolation submicron
MOSFETs," Solid-State Electron., Vol. 46, No. 5, pp. 769-772, May 2002.
-
[5] X. Zhou, "Xsim: A compact
model for bridging technology developers and circuit designers," (Invited
Paper), Proc. 5th International Conference on Modeling and Simulation of
Microsystems (WCM-MSM2002), San Juan, Puerto Rico, Apr. 2002, pp. 710-714.
-
[5] S. B. Chiah, X. Zhou, K.
Y. Lim, A. See, and L. Chan, "Physically-based approach to deep-submicron
MOSFET compact model parameter extraction," Proc. 5th International Conference
on Modeling and Simulation of Microsystems (WCM-MSM2002), San Juan, Puerto
Rico, Apr. 2002, pp. 750-753.
-
[10] X. Zhou,
S. B. Chiah, and K. Y. Lim, "A Technology-Based Compact Model for Predictive
Deep-Submicron MOSFET Modeling and Characterization," (Invited Paper),
Proc. of the 6th International Conference on Modeling and Simulation of
Microsystems (WCM-MSM2003), San Francisco, CA, Feb. 2003, vol. 2, pp. 266-269.
-
[8] S. B. Chiah, X.
Zhou, and K. Y. Lim, "Unified Length-/Width-Dependent Drain Current
Model for Deep-Submicron MOSFETs," Proc. of the 6th International Conference
on Modeling and Simulation of Microsystems (WCM-MSM2003), San Francisco,
CA, Feb. 2003, vol. 2, pp. 342-345.
-
[6] S. B. Chiah, X.
Zhou, K. Chandrasekaran, K. Y. Lim, L. Chan, and S. Chu, "Threshold-Voltage-Based
Regional Modeling of MOSFETs with Symmetry and Continuity," Proc. of the
7th International Conference on Modeling and Simulation of Microsystems
(WCM-MSM2004), Boston, MA, March 7-11, 2004, Vol. 2, pp. 175-178.
-
[34] Abhinav
Kranti, Tsung Ming Chung, Denis Flandre, and Jean-Pierre Raskin,
"Laterally asymmetric channel engineering in fully depleted double gate
SOI MOSFETs for high performance analog applications," Solid-State Electron.,
vol. 48, no. 6, pp. 947-959, 2004.
-
[8] S.
Baishya, A. Mallik, C. K. Sarkar, "A subthreshold surface potential
model for short-channel MOSFET taking into account the varying depth of
channel depletion layer due to source and drain junctions," IEEE
Trans. Electron Devices, vol. 53, no. 3, pp. 507-514, Mar. 2006.
-
[6] A.
Pouydebasque, C. Charbuillet, R. Gwoziecki,
and T. Skotnicki, "Refinement of the subthreshold slope modeling
for advanced bulk CMOS devices," IEEE Trans. Electron Devices, vol.
54, no. 10, pp. 2723-2729, Oct. 2007.