Publications
by Dong Wei SHU
Refereed Journals
(2025
6 papers)
168
Jian Yang, Bo Liu, Dongwei Shu, Qin Yang, Yunbo Zeng, Jun Huang. Data-driven analysis
of the process, organization and properties of large-size complex thin-walled
die-casting Aluminium alloys, Engineering Applications of Artificial
Intelligence. Vol 156 [EAAI_111244] published May 26 2025.
167Jian Yang, Bo Liu, Dongwei Shu, Huizhao Li, Qin Yang, Tiegang Hu, Zhibai Wang,
Yunbo Zeng, Jun Haung, Xiaoliang Tang. Effect of ultra vacuum assisted high
pressure die casting on the mechanical properties of Al-Si-Mn-Mg alloy.
JALCOM_180531 published in Journal of Alloys and Compounds. 2025 0423
#166
Jian Yang, Bo Liu, Dongwei Shu, Huizhao
Li, Qin yang, Tiegang Hu, Zhibai
Wang, Yunbo Zeng, Jun Huang, Xiaoliang
Tang, Siqi Zou
"Effect
of casting pressure on porosity, microstructure, and mechanical properties of
large die casting Aluminum alloy parts",
accepted 2025-04-14 “International Journal of Metalcasting”
IJMC-D-25-00043R2
#165
Wenhui Shi, Shuai Yue, Dongwei Shu, Yong Yuan,
Zhonghua Du, Guangfa Gao. Repeatable Energy
Absorption Characteristics of the Oil-Negative Stiffness Honeycomb Damping
System “Construction and Building Materials” 467 (2025) 140297.
#164
Jian Yang, Bo Liu, Dongwei Shu, Qin Yang, Tiegang Hu. 2024. Vehicle giga-casting Al alloys
technologies, applications, and beyond. Journal of
Alloys and Compounds Volume 1013, 31
January 2025, 178552
Received
18 November 2024, Revised 6 January 2025, Accepted 7 January 2025, Available
online 9 January 2025, Version of Record 11 January 2025
#163
Jian Yang, Bo Liu, Dongwei Shu, Qin Yang, Tiegang Hu. 2024. Local stress/strain field analysis of
die-casting Al alloys via 3D model simulation with realistic defect
distribution and RVE modelling. Engineering Failure Analysis. Volume 168
(2025), 109104 https://doi.org/10.1016/j.engfailanal.2024.109104
(2024 3 papers)
#162
H Y Yang, H B Lu, D W Shu and Y Q Fu 2023 Multimodal origami shape memory
metamaterials undergoing compression-twist coupling Smart Mater. Struct. Volume
32, Issue 7, id.075013, 10 pp.
#161
Shiwen Feng, Q.M. Li*, Zhongmin Xiao, Dongwei Shu. Elastic wave propagation in a porous composite
with gradient porosity.
International
Journal of Mechanical Sciences. 265(2024) Received 24 August 2023;
Received in revised form 26 November 2023; Accepted 3 December 2023
#160
Yuheng Liu, Dong-Wei Shu, Haibao Lu, Denvid Lau, Yong-Qing Fu. “3D printable spatial fractal
structures undergoing auxetic elasticity”. Extreme Mechanics Letters
Volume
66, January 2024, 102112 https://doi.org/10.1016/j.eml.2023.102112
(2023
3 papers)
#159
Yu Heng LIU*, Hai Bo LU, Dong Wei SHU, Wei Min Huang. An epigenetic bi-stability
of structural metamaterials undergoing dual matching shape-memory effects. (submitted to Smart Mater. Struct. Manuscript reference:
SMS-114873)
#158 Yu Heng LIU*, Dong Wei SHU, Hai Bo LU. 3D printing shape memory polymer of laminated multi-component metamaterial towards optimization of auxetic and shape recovery behaviors". Smart Mater. Struct. Accepted Jan 9, 2023. Manuscript reference:
SMS-114536.R1
#157
Ziyu XING*, Dong-Wei SHU, Haibao LU, Yong-Qing
FU. Undirected graphical model of adjacency matrix for dynamic elasticity in
polyelectrolyte hydrogels. Polymer 264 (2023) 125531
(2022-10)
##156
Chen, Yong; Li, Dongming; Feng, Shuai; Huang, Qiong; Chen, Zheming; Shu, Dongwei.
Optimization and thermal-performance deep learning on carbon/epoxy composite
panels with microchannel structure for battery cooling. Applied Thermal
Engineering Volume 217. 25 November 2022 Article number 119162
#155
Yuheng Liu*, Linlong Peng, Zhenghong
Li*, Haibao Lu and Dong-Wei Shu. 3D Printed
Nonuniform Auxetic Structure: Programmable Local Stiffness to Improve
Mechanical Property by Avoiding Buckling. International Journal of Applied
Mechanics Vol. 14, No. 10, 2250098 (2022)
#154
Ziyu XING*, Haibao LU, Dong-Wei SHU, Yong-Qing
FU. Non-Euclidean geometry model for chemo-mechanical coupling in
self-assembled polymers towards dynamic elasticity. Polymer. Volume 254, 21
July 2022, 125094
#153 Edwin Carcasona, Ronald M. Galindo, Akihiro Takita, Ethelda Magalang, Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei SHU, Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii. Very-Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask Industry (DFM-I) Prototype No.1” and Proposal for a Lockdown-Free Industry. Journal of Technology and Social Science (JTSS) P1-4. Vol.6, No.2, 2022.
#152
Ronald M. Galindo, Akihiro Takita, Edwin Carcasona, Ethelda Magalang,
Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei SHU, Haruo Kobayashi, Kenji Amagai,
Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii.
Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask
Frontline (DFM-F) Prototype No.1” for the Operational Tests in Hospitals in Cebu
City, Philippines. Journal of Mechanical and Electrical Intelligent System
(JMEIS) p1-6. Vol.5, No.2, 2022
#151
Yuheng Liu*, Ming Lei, Linlong Peng, Haibao Lu, Dong-Wei Shu. 3D printing auxetic draft-angle
structures towards tunable buckling complexity. 2022
Smart Mater. Struct. Vol 31 055010
#150
Xing, Ziyu*; Shu, Dong-Wei; Lu, Haibao;
Fu, Yong-Qing. Untangling the mechanics of entanglements in slide-ring gels
towards both super-deformability and toughness. Soft Matter. Volume 18, Issue
6, Pages 1302 – 1309 14 February 2022
#149
Zhenghong Li*, Yuheng Liu*, Haibao Lu and Dong-Wei Shu. Tunable
hyperbolic out-of-plane deformation of 3D-printed auxetic PLA shape memory
arrays. Smart Materials and Structures, Volume 31, Number 7 075025 20 June 2022
© 2022 IOP Publishing Ltd
#148 藤井雄作，Ronald M. Galindo, Edwin
Carcasona, 田北啓洋, Ethelda Magalang,
Tabetha S. Galindo, 橋本誠司, 山口誉夫, Edgar U. Tibay, Dongwei Shu, 小林春夫, 天谷賢児, 太田直哉, 吉浦紀晃, 桑名杏奈,矢野絢子，“国際研究協力プロジェクト 低コスト個人用呼吸空気浄化デバイス開発と，フィリピン・セブ市内の病院での運用試験（第一報）”, 社会安全とプライバシー, Vol.6, No.1, pp.1-9, 2022.
#147 (in English) Y. Fujii, R.
Galindo, E. Carcasona, A. Takita, E. Magalang, T.
Galindo, S. Hashimoto, T. Yamaguchi, E. Tibay, D.W. Shu, H. Kobayashi, K.
Amagai, N. Ohta, N. Yoshiura, A. Kuwana, A. Yano, "1st Report on the
International Collaboration Project: Development of Low-Cost Powered
Air-Purifying Respirator and Tests in Hospitals in Cebu, Philippines", Japanese
Journal of Social Safety and Privacy, Vol.6, No.1, pp.1-9, 2022.
(written in Japanese)
(2021-1)
146 Yuheng Liu, Ming Lei, Haibao Lu, and Dong-Wei Shu. Sequentially tunable buckling in 3D printing auxetic metamaterial
undergoing twofold viscoelastic resonances. Smart Materials and Structures.
Volume 30, Number 10, 2021
(2020-1)
145 Ngoc San Ha, Guoxing Lu, DongWei
Shu, T.X. Yu. Mechanical properties and energy absorption characteristics of
tropical fruit durian (Durio zibethinus). Journal of the Mechanical Behavior
of Biomedical Materials. 104 (April 2020) in print
（2019-2）
144 Chengxin Du, Dongwei Shu, Zhonghua Du, Guangfa
Gao, Meng Wang, Zhengwang Zhu, Lizhi Xu. Effect of
L/D on penetration performance of tungsten fibre/Zr-based bulk metallic glass matrix composite rod. International Journal of Refractory Metals & Hard Materials.
85 (Dec 2019)
143 Muhammad A. Kariem, Rafael C.
Santiago, Reuben Govender, Dong Wei Shu,
Dong Ruan, Gerald Nurick, Marcilio
Alves, Guoxing Lu, Genevieve S. Langdon. Round-Robin test of split Hopkinson
pressure bar. International Journal of
Impact Engineering. Vol.126 (2019) pp62-75
(2018-2)
142 Dongwei
Shu, Iram R Ahmad, Jing Xiao. Promising Magnesium Alloys for Mobility and
Portability. Journal of Technology and Social Science. 2018 Vol 2 No 2 page 1-6
141 Wang, Yonghu;
Shu, Dongwei; Yusaku, Fujii; Takita Akihiro, Ishima Tsuneaki and Araki
Ryosuke. Comparison between numerical analysis and the levitation mass method
measurement test of a spherical structure early impacting water. ADVANCES IN
MECHANICAL ENGINEERING Volume: 10 Issue: 1
Article Number: 1687814017748076
Published: JAN 6 2018
(2017-1)
140 S. C. Liu, G. X. Lu, D. W. Shu, Y.
X. Zhou, Z. Y. Zhao, "A New Design of Energy Absorbing Bolt", Key
Engineering Materials, Vol. 725, pp. 162-167, 2017
2016
137 X.M. Xiang, G. Lu,, G.W. Ma, X.Y. Li, D.W. Shu. Blast response of sandwich beams with thin-walled tubes as core. Engineering Structures. 127 (2016) 40-48
136* T. Y. Yang · D. W. Shu · B. J. Shi
· X. Bai,
Effects of disk surface roughness on static flying characteristics of air
bearing slider by using a combined method of Reynolds equation and rough disk
surface. Microsystem Technologies. Accepted: 27 August 2015 DOI
10.1007/s00542-015-2672-7
2015
135 Ryosuke Araki , Akihiro Takita, Prin Nachaisit, Dong-Wei Shu and Yusaku Fujii. Frictional Characteristics of a Small Aerostatic Linear Bearing. Lubricants. 2015, 3, 132-141; doi:10.3390/lubricants3020132.
134* Ahmad, I. R.; Shu, D. W.
Experimental and Constitutive Study of Tensile Behavior of AZ31B Wrought
Magnesium Alloy. JOURNAL OF ENGINEERING MECHANICS Vol 141(3) MAR 2015
2014
133*Q1 J Xiao, D W Shu, XJ Wang, “Effect of strain rate and
temperature on the mechanical behavior of magnesium
nanocomposites”. International Journal of Mechanical Sciences 89(2014)381–390.
132* Liu, Y; Shu, D.W. Coupled bending-torsion vibration of a homogeneous
beam with a single delamination subjected to axial loads and static end
moments. ACTA MECHANICA SINICA Vol 30(4)
P607-614, Aug 2014
131* Xiao, Jing; Ahmad, Iram
Raza; Shu, D. W. Dynamic behavior and constitutive modeling of magnesium alloys AZ91D and AZ31B under high
strain rate compressive loading MODERN PHYSICS LETTERS B Vol 28(8) MAR 30
2014
130*Q1 Liu, Y.; Shu,
D. W. Free vibration analysis of exponential functionally graded beams with a
single delamination. COMPOSITES PART B-ENGINEERING vol 59 pp166-172 Mar 2014
129* Ahmad, I. R.; Shu, D. W.
Compressive and constitutive analysis of AZ31B magnesium alloy over a wide
range of strain rates. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
PROPERTIES MICROSTRUCTURE AND PROCESSING Vol592 pp40-49 Jan 2014
128 Xiao, Jing; Shu, D. W.; Goh,
Kok Swee Effect of Temperature on the Dynamic Compressive Properties of
Magnesium Alloy and its Nanocomposite. Proceedings of SPIE Vol(9234) 2014
127 Yang LIU*, Jing
XIAO*, Dongwei SHU, Free Vibration of
Delaminated Beams with an Edge Crack, Procedia Engineering Volume 75, 2014,
Pages 78–82.
126 Yang LIU*, Jing
XIAO*, Dongwei SHU, Free Vibration of
Exponential Functionally Graded Beams with Single Delamination, Procedia
Engineering. Volume 75, 2014, Pages 164–168.
2013-7
125*Q1 Della, C. N.*;
Shu, D. Performance of 1-3 piezoelectric composites with porous
piezoelectric matrix APPLIED PHYSICS LETTERS Vol 103(13) SEP 2013
124 Yang Liu*, Dong Wei Shu.
Analytical Solution of the Vibration of Delaminated Bimaterial
Beams Fully or Partially Supported by Elastic Foundation. Applied
Mechanics and Materials Vol. 394 (2013) pp 75-79
123 Jing Xiao*, Dong
Wei Shu. (2013) Dynamic Response of Magnesium Alloy and its Nanocomposite
under High Strain Rate Compressive Loading. Applied Mechanics and Materials
Vol. 394 (2013) pp 20-25
122 Xiao, J. * and D. W. Shu (2013). The
effect of specimen size on the dynamic compressive behaviour of magnesium alloy
AZ31B. Key Engineering Materials
Vols. 535-536 (2013) pp 141-144
121 Ahmad, I. R.; Jing, Xiao;
Shu, D. W. Effect of Temperature on the Dynamic Compressive Properties of
Magnesium Alloy AZ91D. Key Engineering Materials Vol 535-536
pp133-136
120 Ahmad, I. R.; Syfiqu, Muhammad; Jing, Xiao et al; Ed. Lu, GX; Zhang, QM.
Strain rate effect on microstructure of dynamically compressed Magnesium Alloy
AZ31B. Key Engineering Materials Vol
535-536 pp137-140
119*Q1 Liu, Yang; Shu, D.W. Free
vibration analysis of rotating Timoshenko beams with multiple delaminations. COMPOSITES PART B-ENGINEERING Volume: 44 Issue: 1
Pages: 733-739 Published: JAN
2013
2012
118 I. R. Ahmad, D. W. SHU. (2012) “Anisotropic
Behaviour of AZ31B sheet at high strain rates” Journal of Applied Mechanics and Materials Vol. 151 pp. 726-730
117 I. R. Ahmad, D. W. SHU. (2012) “Magnesium Alloys
a Promising Option as Protection Materials” Journal of Solid State Phenomena Vol. 185 pp. 116-118
2011
116 Shu, D.W. Vibration of beams with a
single delamination under axial loading (2011) Materials Science Forum,
675 677, pp. 477-480.
115 Ahmad, I.R., Shu, D.W. Effect of Specimen
Diameter in Compression at High Strain Rates (March 2011) Journal of
Engineering Mechanics, 137 (3), pp. 169-174.
114 Shu, D.W., Ahmad, I.R. Magnesium alloys:
An alternative for aluminium in structural
applications (2011) Advanced Materials Research, 168-170, pp.
1631-1635.
113 I.
R. Ahmad, D. W. SHU. (2011) “Dynamic response of magnesium alloy
AZ31B under high strain rate compressive loading” Applied Mechanics and Materials Vol. 83 pp. 60-65
2010
112 I. R. Ahmad, SHU D. Wei.
(2010) “Tensile Properties of die-cast
magnesium alloy AZ91D at high strain rates in the range between 300 s-1
and 1500 s-1” Journal of Applied Mechanics and Materials. Vols. 24-25, pp: 325-330
111 I. R. Ahmad,
SHU D. Wei. (2010) “Mechanical Behaviour
of Magnesium Alloy AZ91D Using Split Hopkinson Tensile Bar (SHTB).” Proc.
of SPIE Vol. 7522 75222C-1
110 Shu, D.W., Yap, F.F., Gu, B., Shi, B.J. Effect of
disk clamping conditions on the operational shock response of hard disk drives
(2010) Digest of the Asia-Pacific Magnetic Recording Conference 2010, APMRC
2010, art. no. 5682262, .
109 Gu, B., Shu, D., Fujii, Y., Shi, B. Dynamic
response measurement of 1-inch HDD head arm assembly (2010) Applied
Mechanics and Materials, 36, pp. 52-56.
108 Chen, Y.H., Zhao, Y., Huang, W.M., Shu, D.W.
Kinematics of dragonfly (Sympetrum flaveolum)
flight (2010) IFMBE Proceedings, 31 IFMBE, pp. 56-59.
107 Shi, B.-J., Li, H.-Q., Song, S.-J., Shu,
D.-W., Gu, B. Influence of intermolecular force on dynamic performance of
air-bearing sliders with ultra-low flying heights (2010) Binggong Xuebao/Acta Armamentarii, 31 (SUPPL. 1), pp. 98-101.
106 Shi, B.J., Gu, B., Shu, D.W., Jin, T.H. Modal
analysis and damping measurement of the head arm assembly of a small form
factor hard disk drive (2010) International Journal of Modern Physics B,
24 (1-2), pp. 26-33.
105 Gu, B., Shu, D., Shi, B. Shock pulse
amplitude and width effects on the shock response of an operational disk drive
(2010) International Journal of Modern Physics B, 24 (1-2), pp. 209-214.
104
SHU Dong Wei, Iram Raza AHMAD. (March 2010). Effect of specimen dimensions in
dynamic torsion testing. Advanced Materials Research, 97-101, 667-670.
2009
103 Ahmad, I.R., Shu, D.W. Compressive properties of AM50 and AZ91D alloys
using split Hopkinson pressure bar (2009) Proceedings of SPIE - The International
Society for Optical Engineering, 7493, art. no. 749326.
102 Luo J., Wang T.，Shu D.W., Wu J.K.,
2009, Finite element analysis of dynamic performance of the Read/Write arm
of HDD, Machinery & Electronics, Vol. 26, No. 7-9
101
Hongrui AO, Shao WANG, Bin GU, Dong Wei SHU. (2009).
Shock effects on the performance of the interface between the moving suspension
lift-tab and the ramp in a load/unload drive. Microsystem
Technologies-Micro-And Nanosystems-Information
Storage And Processing Systems, 15, 1763–1775.
100 C. N. Della D. Shu. (2009). Free Vibration Analysis of Multiple Delaminated
Beams under Axial Compressive Load. Journal of Reinforced Plastics and
Composites, 28(11), 1365-1381.
99 Gu, B., Shu, D., Fujii, Y.,
Maru, K., Shi, B., Liu, Y. Shock pulse width effects in operational drop test
simulation of a small form factor disk drive with sub-10 nm air bearing slider (2009) Physics Procedia, 2 (1), pp.
13-17.
98 Fujii, Y., Maru, K., Shu, D.-W., Gu, B.,
Yamaguchi, T., Lu, R., Jutanggoon, T., Yupapin, P. Material tester with static and dynamic
micro forces (2009) Physics Procedia, 2 (1), pp. 5-11.
97 Gu, B., Shu, D., Fujii, Y., Shi, B. Dynamic
force measurement of a head arm assembly of a hard disk drive by numerical
analysis and experiments (2009) IEEE Transactions on Magnetics, 45
(11), art. no. 5297563, pp. 5034-5037.
96 Shi, B.-J., Sun, Y.-J., Shu, D.-W., Jiang,
H., Yang, T.-Y. Research and advances on shock and vibration resistance of
hard disk drives (2009) Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics, 26
(3), pp. 324-329.
95
Christian N. DELLA Dong Wei SHU. (2009). Free vibrations of delaminated beams
in prebuckled states: Lower and Upper Bounds. Structural Engineering and Mechanics,
31(1), 113-116.
94 Jiang Dazhi, Shu D.W., 2009, Dynamic Contact Performance of
Rubber Materials for Designing Wiper Blades, Journal of Materials
Engineering and Performance, Vol. 18, No. 3, pp. 255-262
93
Feng ZHU, Guoxing LU, Dong RUAN, Dongwei SHU. (2009).
Tearing of metallic sandwich panels subjected to air shock loading. Structural
Engineering and Mechanics, 32(2), 351-370.
92
Shi BJ, Li HQ, Shu DW. Zhang, Y.M (2009). Nonlinear air-bearing slider modeling
for hard disk drives with ultra-low flying heights. Communications in
Numerical Methods in Engineering, 25 (10), pp. 1041-1054.
2008
89 Parlapalli MR, Soh KC, Shu DW. (2008). Delamination
buckling of Kevlar and Twaron stitched glass\epoxy
composite laminates by experiments. Diffusion and Defect Data Pt.B: Solid State Phenomena,
136, 109-114.
88
Della CN, Shu D. (2008). A comparative study of the hydrostatic performances of
1-3 piezoelectric composites with a porous matrix. Advanced Materials
Research, 47-50(Part 1-2), 503-506.
87 D W SHU, C Q LUO,
G X LU, 2008, Numerical Simulation of the Influence of Striker Bar Length on
SHPB Measurements, International Journal of Modern Physics B, Vol. 22, No.
31 & 32, pp. 5813-5818
86 W Hou, Z Wang, L
Zhao, G X Lu, D W Shu, 2008, Load-Carrying Capactities
for Circular Metal Foam Core Sandwich Panels at Large Deflection,
International Journal of Modern Physics B, Vol. 22, No. 31 & 32, pp.
6218-6223
85 Parlapalli, MR., Bin G, Dongwei,
Shu, Fujii Y, 2008, response measurement of the head arm assembly of a hard
disk drive by numerical analysis and experiments, International Journal of
Precision Engineering and Manufacturing, Vol. 9, No. 4, pp. 22-25
84 PARLAPALLI MADHU SUDHANA RAO Dongwei Shu Gin B. Chai, 2008, Buckling of Composite
Beams with Two Enveloped Delaminations: Lower and
Upper bounds, Computers & Structures, Vol. 86, No. 23-24, pp. 2155-2165
83 Bin Gu, Dong-Wei Shu, Yusaku Fujii and
Bao-Jun Shi, 2008, Inertial force measurement of an actuator arm of a hard
disk drive in free oscillation by numerical analysis and experiments,
Proceedings SPIE, Vol. 7130, No. 7130 2A, pp. 1-6
2007
78. Christian N. Della and Dongwei
Shu, 2007, Effective properties of 1-3 piezoelectric composites: effect of
polarization orientation, SPIE Proceedings, Vol. 6423, No. 1, pp.
642323-1--642323-8.
77 Parlapalli Madhusudhana Rao, Soh Kwok Chye, Shu D.W.,
Ma, G.W., 2007, Experimental Investigation of Delamination Buckling of Stitched
Composite Laminates, Composites Part A -
Applied Science and Manufacturing (United Kingdom), Vol. 38A, No. 9, pp 2024 - 2033.
76
Chen BJ, Shu D.W., Xiao Z.M., 2007, Dislocation interacting with collinear
rigid lines in piezoelectric media , Journal of
Mechanics of MATERIALS and STRUCTURES (United States). Vol.2 (1) 23-42
74.
Shi, B.-J.; Shu, D.-W.; Luo, J.; Gu, B.; Ma, G.-W.; Ng, Q. Y.; Gan, S.,
Operational Shock Simulation of the Head–Disk Assembly of a Small-Form Factor
Drive, IEEE Transactions on Magnetics, Volume 43, Issue 11, Nov. 2007
Page(s):4042 - 4047
72 Fujii, Y., Shu, D.-W. Optical method for
evaluating the impact response of 1" HDD arm (2007) Proceedings of
SPIE - The International Society for Optical Engineering, 6722, art. no.
672216, .
67 Shu D.W., Shi B J, MENG H, Yap F.F., Jiang D Z, NG Q, Razman
Zambri, J H T Lau, Cheng C S, 2007, Shock analysis of a head actuator assembly
subjected to half-sine acceleration pulses, International Journal of Impact
Engineering (United States), Vol. 34, No. 2, pp 253 - 263.
66 Della CN, Shu D.W., 2007, Vibration of Delaminated Composite Laminates: A
Review, ASME Applied mechanics reviews (United States). Vol 60, pp1-20
65 Shu D.W., Zhou W., Ma, G.W., 2007, Tensile Mechanical Properties of AM50A Alloy
by Hopkinson Bar, Key Engineering Materials (Switzerland), Vol. 340-341,
pp 247 - 254.
2006(13)
61 Shi B J, Shu D.W., Luo J, Ng Q Y, Lau JHT, 2006, Experimental and
Numerical Analyses of the Head Arm Assembly of a Micro-drive, Key
Engineering Materials (Switzerland), Vol. 326-328, pp 1585 - 1588.
60 Shu D.W., Shi B J, Meng H, Yap F.F., Jiang D Z, Ng Q Y, R. Zambri, J.H.T. Lau,
2006, The pulse width effect of single half-sine acceleration pulse on the peakresponse of an actuator arm of hard disk drive, Materials
Science & Engineering A (Switzerland), Vol. 423, No. 1-2, pp 199 - 203.
59 Chen B J, Shu D.W., Xiao Z.M., 2006, Electro-elastic interaction of a
piezoelectric screw dislocation and collinear rigid lines, International
Journal of Engineering Science (United Kingdom), Vol. 44, pp 422 - 435.
48
Shi
Bao Jun, Shu D.W., Wang Shao, Luo Jun, Q Ng, Lau J H T, Razman Zambri, 2005,
Shock Response and Power Spectrum Analysis of a Head Actuator Assembly,
Transactions on Engineering Sciences (United Kingdom), Vol. 49, pp 470 - 479.
47 Shi
B. J., Shu D.W., Song S. J., Zhang Y. M., 2005, Solving Burgers Equation by a
Meshless Method, Modern Physics Letters B (Unknown), Vol. 19, No. 28-29, pp
1651 - 1654.
46 Della
CN, Shu D.W., 2005, Vibration of Beams with Double Delaminations, Journal of
Sound & Vibration (United Kingdom), Vol. 282, No. 3-5, pp 919 - 935.
45
He, Z., Ma Hongzhi Wang, J., Tan, G.E.B., Shu, D., Zheng, J. Static
and dynamic fracture behavior of layered alumina ceramics (2005)
Ceramic Engineering and Science Proceedings, 26 (7), pp. 251-255.
24. Shu D.W., 2002, A tube under transverse
loading--FEM and experiment, Key Engineering Materials (Switzerland),
Vol. 233-236, pp 731 - 736.
23. Wang Bin, Shu D.W., 2002, Experimental investigation on the viscoelastic
properties of porous metals. , Journal of Materials Processing Technology
(Netherlands), Vol. 125, pp 144 - 149.
22. Wang B, Zheng J, Shu D.W., 2002, stress and strain rate sensitivity of
37wt%Pb 63wt%Sn Eutectic solders. , Key Engineering Materials (Switzerland),
Vol. 233-236, pp 181 - 186.
2020
Dongwei
SHU. “Adapt and Improve on the Distancing-Free Mask”. Proceedings of
International Conference on Technology and Social Science 2020 (ICTSS 2020) Dec 2-4, 2020
Dongwei
SHU. “Light Magnesium Alloys for Mobile Applications”. Proceedings of
International Conference on Technology and Social Science 2020 (ICTSS 2020) Dec 2-4, 2020
2018
Liu Sicong, SHU Dongwei, LU Guoxing, ZHAO Zhiye, ZHOU Yingxin “Development of Conceptual Design of Dynamic Bolts”, Nanjing, South East University, Dec 29-30, 2018
I R Ahmad, J Xiao, Dongwei SHU. “Light Magnesium Alloys for Mobile Applications”. 2nd International Conference on Advanced Technologies in Design, Mechanical and Aeronautical Engineering (ATDMAE 2018) Dalian, China, July 1-3, 2018
Dongwei SHU, Iram R
Ahmad, Jing Xiao. “Promising Magnesium Alloys for Mobility and Portability”.
Journal of Technology and Social Science (JTSS) J. Tech. Soc. Sci., Vol.2,
No.2, 2018. March 07-10, 2018. Kiryu, Gunma
University, Japan
Sicong Liu, Guoxing
Lu, Dongwei SHU, Yingxin
Zhou, Zhiye Zhao. “A New Design of Energy Absorbing
Bolt” AEPA2016, Dec 2016, Hiroshima, Japan
CN Della, Kasem Chaisieng, DW Shu. Piezoelectric Composites with Soft Elastomer Inclusions for Biomedical Imaging Applications. The 16th International Conference on Biomedical Engineering (ICBME 2016), Singapore
Jing XIAO,
Dong Wei SHU, Guo Xing LU. “High strain rate response of magnesium
nanocomposite.” Smart Equipment and Robot Forum. Aug 3-5, 2016, Huludao, Hebei, China. 1st International Conference on Impact
Loading of Structures and Materials. May 22-25, 2016, Turin, Italy.
XIAO Jing and
SHU Dong Wei. “MECHANICAL BEHAVIOUR OF MAGNESIUM NANOCOMPOSITES AT WIDE RANGE
OF STRAIN RATES AND TEMPERATURES”. International Symposium on Advanced
Materials and Structures (ISAMS 2016). HKUST Jan 2-4, 2016. HongKong
Christian N.
Della and Dong Wei SHU. “Vibration Analysis of Delaminated Composite Beams in Prebuckled States using Lower and Upper Bound Solutions”.
The 2015 International Conference on Materials for Advanced Technologies of the
Materials Research Society of Singapore. June 28 – July 3, 2015, Singapore
Christian N. Della and Dong Wei SHU. “Vibration of Porous
Beams with Embedded Piezoelectric Sensors and Actuators”. June 15-18, 2015.
Lisbon ICCS18 - 18th International Conference on Composite Structures.
Christian N. Della, Li Qiang Eng and Dong Wei SHU.
“Effect of interlayer on the effective performance of piezoelectric composites
with porous matrix”. June 15-18, 2015. Lisbon ICCS18 - 18th International
Conference on Composite Structures.
X.M. Xiang, G. Lu*, Xiangyu Li, D.W. Shu. “Blast tests and finite element
simulations on sandwich beams with tubular cores”. 5th International Conference
on Design and Analysis of Protective Structures (DAPS2015), 19 - 21 May 2015,
Singapore
Jing Xiao,
Dong Wei SHU and I. R. Ahmad.“MECHANICAL
CHARACTERIZATION OF MAGNESIUM ALLOY REINFORCED WITH SIC PARTICLES AT HIGH
STRAIN RATES”. The 2014 SEM Fall Conference and
International Symposium on Intensive Loading and Its Effects 19-22 October
2014, the Friendship Hotel, Beijing, China.
Jing Xiao, Dong Wei SHU and I. R. Ahmad.
“COMPRESSIVE CHARACTERIZATION OF MAGNESIUM MATRIX COMPOSITES REINFORCED WITH
SIC PARTICLES OVER WIDE RANGE OF STRAIN RATES” 6th international conference on
PROTECTION OF STRUCTURES AGAINST HAZARDS 16-17 October 2014, Tianjin
Architecture University, Tianjin, China.
Iram Raza Ahmad, Xiao Jing, and SHU Dong Wei
(presenter). “Mechanical Behaviour of AZ91D and AZ31B Magnesium Alloys at Wide
Range of Strain Rate and Temperature”. First International Symposium on
Machining and Mechanics of Composites, ISMMC 2014, 28-30 June,
2014, Hangzhou
XIAO Jing and SHU Dong Wei. “High Strain Rate Behavior
of Magnesium Nanocomposite with Variation of Temperature”. The 4th International Symposium on Impact Energy
Absorption. June 21-23, 2014, Hangzhou Eastern Cloud Hotel/Hangzhou
City/Zhejiang Province, China
J Xiao and D W SHU. “Dynamic response of magnesium alloy and its nanocomposite under high strain rate compressive loading”. The International Union of Materials Research Societies International Conference on Advanced Materials 2013 (IUMRS-ICAM2013). September 22–23, 2013 Qingdao, China.
Jing XIAO, Dong Wei SHU. ”Dynamic
Response of Magnesium Alloy and its Nanocomposite under High Strain Rate
Compressive Loading” Applied Mechanics and Materials
Vol. 394 (2013) pp 20-25© (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.394.20
Yang LIU, Dong Wei SHU. “Analytical Solution of the
Vibration of Delaminated Bimaterial Beams Fully or
Partially Supported by Elastic Foundation” Applied
Mechanics and Materials Vol. 394 (2013) pp 75-79© (2013) Trans Tech
Publications, Switzerland doi:10.4028/www.scientific.net/AMM.394.75
Yang LIU, Jing XIAO, Dongwei
SHU. “Free Vibration of Delaminated Beams with an Edge Cracks”. International
Conference on Materials for Advanced Technologies 2013, Singapore. MRS
Singapore - ICMAT Symposia Proceedings. Procedia Engineering 00 (2013) 000–000
Yang LIU, Jing XIAO, Dongwei
SHU. “Free Vibration of Exponential Functionally Graded Beams with Single
Delamination”. International Conference on Materials for Advanced Technologies
2013, Singapore. MRS Singapore - ICMAT Symposia Proceedings. Procedia
Engineering 00 (2013) 000–000
Mohamad Raza Iram and SHU Dong Wei (Presenter). “Mechanical Behaviour of Magnesium Alloys At High Strain Rates”. International Symposium on Dynamic Behavior of Materials and Structures. 26-29 June, 2012. Ningbo, P. R. China
Iram Raza AHMAD and Dong Wei SHU. “Magnesium Alloys
Promising Future Structural Materials: A Review”.
6th Japan-Korea-China Student Symposium 2012, March 9-10,
2012, Tokyo Institute of Technology, Tokyo, Japan
LIU Yang and SHU Dong Wei. “Coupled Flexural-Torsional Vibration of Delaminated Beams Subjected to Axial Loads and Static End Moments”. The 3rd International Symposium on Plasticity and Impact (ISPI’2011). Hong Kong University of Science and Technology. 8 Dec – 9 Dec, 2011
Gang MA, Jianming YUAN, and Dongwei SHU. “Mechanical Properties of Aluminum Alloy 6061 at High Strain Rate”. ICMAT 11th International Conference for Materials and Advanced Technologies. June 26 - July 1, 2011.Singapore
Gang MA, Jianming YUAN, and Dongwei SHU. “Mechanical Properties of Mild Steel JIS G3123 at High Strain Rate”. ICMAT 11th International Conference for Materials and Advanced Technologies. June 26 - July 1, 2011. Singapore
Iram Raza AHMAD and Dong Wei SHU. “Magnesium Alloys a Promising Option as Protection Materials”. ICMAT 11th International Conference for Materials and Advanced Technologies. June 26 - July 1, 2011. Singapore
Y Liu and DW Shu. “Vibration Of Beams With Two Non-Overlapping Delaminations Under Axial Compressive Loading”. The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), Hong Kong Special Administrative Region, China, 24-26 January 2011
2010
Dong Wei SHU, Bao Jun SHI, and Jun LUO. “Numerical simulation of the drop test of Hard Disk Drives.“
The 2nd International Conference on Science and Engineering (ICSE 2010). Sedona
Hotel, Yangon, Myanmar, December 2 - 3, 2010
Iram Raza Ahmad and SHU Dong Wei. “Dynamic response of
magnesium alloy AZ31B under high strain rate compressive loading”. Presented at
The International Conference on Experimental Mechanics and The
9th Asian Conference on Experimental Mechanics. Nov 29- Dec 1, 2010
ICEM10 KualaLumpur, Iram J App Mech Mat.
D W Shu. “Vibration of Beams
with A Single Delamination under Axial Tensile Loading”. The 7th International Forum on Advanced
Material Science and Technology, Dalian University of Technology, June
26-28, 2010, Dalian, China.
Bin Gu, Dongwei SHU,
Yusaku Fujii and Baojun SHI. “Dynamic Response Measurement of 1-inch HDD Head
Arm Assembly”. International Conference on Precision Instrumentation and
Measurement 2010 (CPIM2010). Kiryu, Gunma, Japan,
17-20 March 2010, Special issue of Applied Mechanics and Materials
SHU Dong Wei , Iram Raza AHMAD. “Effect of specimen dimensions in dynamic torsion testing”. International Conference on Manufacturing Science and Engineering (ICMSE 2009). Dec 26- 28, 2009. Zhuhai, China.
SHU D. W, I. R. Ahmad.
“Mechanical Behaviour of Magnesium Alloy AZ91D Using Split Hopkinson Tensile
Bar (SHTB)”. 4th International Conference on Experimental
mechanics 2009(ICEM 2009). Nov. 18-20, 2009, Singapore
SHU Dong Wei.
“Split Hopkinson Pressure Bar”. The Second
International Symposium on Plasticity and Impact (ISPI’09) Oct 23-25, 2009. Beijing
Dong Wei SHU. “EXPERIMENTAL HALF-SINE ACCELERATION
PULSE USING HAMMER” IEEE ICMA 2009, 2009 IEEE International Conference on
Mechatronics and Automation. August 9 - 12, 2009. Changchun, Jilin, China
Iram Raza AHMAD, SHU Dong Wei. “COMPRESSIVE PROPERTIES OF AM50 AND AZ91D ALLOYS USING HOPKINSON BAR (SHPB)”. International Symposium on: Smart Material and Nanotechnology, to be held 8-11 July 2009, in Weihai, China.
SHI B.J., GU B. SHU D.W., JIN
T.H. W Shi. “Modal Analysis and Damping Measurement of the Head Arm Assembly of
a Small Form Factor Hard Disk Drive”. ICMAT 2009
International Conference on Materials for Advanced Technologies and IUMRS – ICA
2009. International Union of Materials Research Societies – International
Conference in Asia 2009. Singapore. 28 June - 3 July 2009.
BIN GU; Dong-Wei Shu; Bao-Jun
Shi. “Operational Shock Response of A Small Form
Factor Hard Disk Drive”. ICMAT 2009 International Conference
on Materials for Advanced Technologies and IUMRS – ICA 2009. International
Union of Materials Research Societies – International Conference in Asia 2009.
Singapore. 28 June - 3 July 2009.
Bin
GU, Dongwei SHU, Yusaku Fujii, Koichi Maru, Baojun
SHI and Yan LIU. “Shock pulse width
effects in operational drop test simulation of a small form factor disk drive
with sub-10 nm air bearing slider”. Frontier Research in Nano Scale Science and
Technology. Physics Procedure 2009. Isan, Thailand. Apr 28, 2009
Shi B.J.
Shu D.W. and Fujii Y. “Shock Simulation of the Actuator Arm of a Hard
Disk Drive”. ISQMPM April 2009 Gunma University, Japan
B.
J. Shi, D. W. Shu, B. Gu, and W. S. Yuan, 2009, Design Considerations for
Reducing Shock Responses of a Micro-Drive, APMRC2009, Asia-Pacific Magnetic
Recording Conference, Singapore, Singapore, pp. BS-05 Jan 2009
Bin GU, Dongwei SHU, Yusaku
Fujii, Bao Jun SHI, 2009, Dynamic Force Measurement of a Head Arm Assembly of a
Hard Disk Drive by Numerical Analysis and Experiments, APMRC2009,
Asia-Pacific Magnetic Recording Conference, Singapore, Singapore, pp. ER-04
Jan 2009
2008
Bin Gu, Dong-Wei Shu, Yusaku Fujii and Bao-Jun Shi,
2008, Inertial force measurement of an actuator arm of a hard disk drive in
free oscillation by numerical analysis and experiments, Fourth International
Symposium on Precision Mechanical Measurements, Hefei, Anhui Province,
China, China pp. 2A 1-6
Dong
Wei SHU, Chun Qi LUO, Guo Xing LU, 2008, NUMERICAL SIMULATIONS OF THE INFLUENCE
OF STRIKER BAR LENGTH ON SHPB MEASUREMENTS, The Asia-Pacific Conference on
Engineering Plasticity and Its Application (AEPA2008), Daejeon, Korea,
South Korea, pp. 12-13
W. Hou, Z. Wang, G Lu, D Shu, L Zhao, 2008,
Load-carrying capacities for circular metal foam core sandwich panels at large
deflection, The 9th Asia-Pacific Conference on Engineering Plasticity and
its Application (AEPA2008), Daejon Korea, South Korea, pp. 6-7