| Research Students As of 13th Jan 05 | ||
| Student | Degree | Title |
| Ai Jiaojian | ST | Thermal spraying process characterization using phase-doppler anemometry |
| Alison Subiantoro | MEng | Development of an Electrokinetic Actuator |
| Andiyanto Sutandar | ST | Optical Sensing of Antibiotic Resistant Bacteria |
| Andre Willy | MEng | A Maneuverable Underwater Robot |
| Ang Tee Hwee | ST | On-line Near-Real-Time Scheduling of Semiconductor Wafer Fabrication Manufacturing Systems |
| Benzi John | ST | Modeling and optimization of airflow, heat transfer and particle trajectories in the vicinity fo the narrow head-disk interface gap |
| Bimo Eko Satrio | MEng | Vehicle Accident Reconstruction Using Multibody Dynamics and Finite Element Simulation |
| Cai Xinle | MEng | Multiscale Modelling of Nanoscale Phenomena |
| Cao Changrong | ST | Three Dimensional In Silico Modeling of Biomolecular and Cellular System |
| Chan Wing Yue | ST | Bioreactor design for tissue engineering: optimization of the chemico-mechano environment |
| Che Faxing | ST | Development of a failure assessment methodology for lead fre electronic assembly |
| Che Jing | MEng | A structured approach to microfabrication of biochip |
| Chen Bangtao | ST | 3-D Electrostatic Microactuators and their Applications in the Dual-Stage Positioning System of Hard Disk Drives |
| Chen Dafeng | ST | Study of dielectrophoretic microactuation for bio-particles manipulation and separation |
| Chen Fangzhi | ST | Mathematical modeling of particle dynamics and deposition in chamber |
| Chen Hanxin | ST | Computer monitor signal process and fault diagnose |
| Chen Hongjun | ST | Statistical Soft Tissue Modeling for Margin Prediction in Brest Surgery |
| Chen Junyong | ST | Feature Interactions among Multiple Applications for Collaborative Engineering |
| Chen Liang | ST | Collateral Pathway & Autoregulation of the Cerebral Circulation - Numerical Studies and Experimental Investigation |
| Chen Ping | ST | Condition monitoring and nalysis of modern water hydraulic machinery |
| Chen Yun | MEng | Development of novel processes for fabricating polymeric scaffolds for tissue engineering application |
| Cheng Shanbao | ST | Maintenance-free Pump for Water Treatment |
| Cheng Yeong Chang | ST | Studies of an Air cooler under Frost Condition |
| Chia Hon Fai | MEng | Development of distriubted information system for humanoid robot |
| Chia Siok Chen Emileen | MEng | Cost-effective Indices for Hospital Units |
| Chia Yew Choon | ST | A study of underfilling process for micro electronic packaging |
| Chilla Damodara Reddy | ST | Equivalent Continuum Modeling of Graphene Sheets and Carbon Nanotubes |
| Chin Cheng Siong | ST | Robust non-linear control of underwater robotic vehicle (URV) |
| Chin Chi Choong | MEng | Mechanics and reliability of microactuators fabricated using MEMS technology |
| Chong Aik Fong | PhD | Modeling of the cardiac pumping function using computational fluid dynamics for aiding the diagnoisis of cardiovasular diseases |
| Chong Yih Tng | MEng | A Heuristic-based Approach to Customer-driven Conceptual Design |
| Chu Changyong | ST | Design and modelling of process thread of tooling industry |
| Chua Beng Yeow | MEng | Deformation and stress analysis of gate valves |
| Chua Jeun Kee | ST | Research and development of advance phase shifting masks as resolution enhancement techniques (RETs) for sub 65nm technology |
| Chua Loh You | ST | Surface bio-magnetism and its biophysical effects on bacterial cells |
| Cui Zhanhua | ST | The Analysis of Hetero-dimmer Complexes |
| Dai Sheng | PhD | Microstructure and Thermodynamics of Polymer/surfactant Systems |
| Darius Alisantoso | ST | An intelligent collaborative environment for product design |
| Della Christian Ngalatan | ST | Vibration of Composite Laminates with Multiple Delaminations |
| Dilla Handini | MEng | System Integration and Improvement of NeuRobot |
| Ding Ovi Lian | PhD | Water-gas shift assisted autothermal fuel reforming |
| Ding Yinfeng | ST | Nano-cluster assembled FePt media |
| Dinish Unnimadhavakurp Soudaminiamma | ST | Investigation into Phase-resolved Optical Technique for Latent Fingerprint Detection and Bioimaging |
| Dixit Pradeep | ST | Silicon Micromachining for RF MEMs |
| Feng Zhiqin | ST | Effect of external stimuli on cell adhesion dynamics |
| Florencia Edith Wiria | ST | Solid Freeform Fabrication of Poly(Vinyl Alcohol)/Hydroxyapatite Composites for Biomedical Applications |
| Foo Choon Chiang | ST | Energy Absorption Characteristics of Sandwich Panel Subject to Impact |
| Fu Gang | ST | Development and Analysis of Micro Powder Injection Moulding |
| Gan Hiong Yap | ST | Micro-Fluidic / Bio MEMs |
| Gao Yandong | ST | Electrokinetic phenomenon in two-phase gas-liquid flow |
| Goh Chong Minsk | ST | Dynamic Enterprise Integration and Collaboration via Smart Services |
| Goh Chung Wen Francis | MEng | Self-Propagating High Temperature Sintersis of Porous Implants for Osseointegration |
| Goh Hong Joo | MEng | Computational study of the effects of hard disk drive enclosure form factor on air flow, temperature field and particle trajectories |
| Goy Hsu Ann | PhD | Development and characterisation of rubber modified bismaleimide resin for microelectronics applications |
| Guan Cong | ST | H2 Storage in Carbon Nanoparticles |
| Guan Yunqing | ST | Localised and Reach-in approach to volumetric data manipulation for biomedical science applciation |
| Guo Dagang | ST | Development of optical sensing technology for MEMS devices |
| Guo Yufeng | ST | Nonlinear dynamics of excited tracks |
| Han Ming | ST | Investigation of Performance and Microstructure of Membrane-Electrode Assembly in PEMFC |
| Han Yufei | ST | Flying Stability in Nano Meter Spaced Head Disk Interface |
| Hao Zhiyong | ST | Experimental studies on vorticity field in the far region of a cylinder wake |
| He Weiguo Elaine | MEng | Synthesis and Self-assembly of Fullerence-Grafted Polymer Systems |
| Hendra Purnawali | MEng | Modeling, Simulation and Control of Car-like Vehicle |
| Hendra Sulistio Kasim | MEng | Design of a Flexure-Based System for Future-Deformation Measurement of Micro Structures |
| Hendri Harmoko | ST | Vibration Isolation Studies for Hard Disk Drives Under Severe Shock and Random Vibration |
| Hou Dongxia | ST | Energy Deposition and Thermal Damage in Ocular Tissue by Femtosecond Laser Irradiance |
| Hu Yingyong | ST | Thermal Stress Analysis and Characterization of Thermomechanical Properties of Thin Films |
| Ji Wenfa | ST | Numerical simulation and measurements of a heart pump |
| Jia Qipeng | ST | Theoretical & experimental studies on activated carbons prepared from biomass for aqueous-phase adsorption |
| Jiao Shuxiang | MEng | Development of automated ultrasonic systems |
| Jin Liangyong | ST | Feature-based Knowledge Realization in Product Lifecycles |
| Jin Liwen | ST | Study of a novel porous channel heat sink for microelectronics cooling |
| Jin Yan | ST | Configuration planner for reconfigurable automation workcell |
| Kandhasamy Sadhasivam Jayakumar | ST | Distributed sensing and perception system for smart vehicle |
| Kang Chang Wei | ST | A deposition model for plasma sprayed coating process on three dimensional topological surfaces |
| Ke Feixiang | ST | Design and Fabrication of High Power RF MEMS Switch with High Reliability, High Speed and Low Insertion Loss |
| Ke Li | ST | Dynamics of aortic valve |
| Ketut Sulistyawati | ST | Development of Software Tools to Support Operator Mental Workload Assessment |
| Khoong Ling Eng | ST | Numerical and Experimental Investigations of Thermal Debinding Process in Powder Injection Moulding |
| Koh Ai Leen | MEng | Assessment and design of sleeves for coronary artery bypas grafting |
| Koh Chai Wah | ST | Development of a Demonstrator Prototype of an NVG Training Simulator |
| Koh Ke Yuan | MEng | Parametric and computational fluid dynamics study of coronary stents |
| Koh Teck Hong | PhD | Design and Control of an Underactuated Underwater Robotic Vehicle |
| Kotlanka Rama Krishna | ST | Development of mcromechanics models for bone fracture fixation |
| Kumar Shashi Bhushan | ST | Optimal design of circular sandwich panel comprising CFRP facesheets and a polymeric foam core |
| Kusumastuti Ratih Dyah | ST | Modelling reverse logistics of product recovery |
| Lam Ah Wah | ST | Computational modeling and anlaysis of quantum dots |
| Lam Suet Hoi | ST | Intelligent 3-D layout optimisation |
| Lee Chi Seng | ST | Classification of airfoils by abnomal behavior of lift curves at low Reynolds number |
| Lee Teck Kheng | ST | Flip chip packaging with joint-in-via on flexible tape substrates |
| Leong Meng Fatt | ST | Development of Tissue Engineered Scaffold for Esophageal Regeneration |
| Lewpiriyawong Nuttawut | MEng | Effect of the Wing Shape to the Post-Stall Flow Behaviour(Form R/964/96C not submitted yet) |
| Li Bingqing | ST | Rapid Nutrient Deficiency Detection System |
| Li Kunpeng | ST | Analysis of electronics assembly supply chain and synchronization of schedules using discrete event simulation |
| Li Lei | ST | Relationship between structure and functions of proteins |
| Li Mingjian | ST | Mechatronic design and analysis of electric bus of reduced scale |
| Li Qiang | ST | Topology Optimization for Air Bearing Sliders Design in Hard Disk Drives |
| Li Xuhong | ST | Development of a Mesh-free computational method for air bearing suspension design in HDD |
| Li Yajing | ST | Theoretical modeling and numerical simulaiton of DNA dynamics |
| Li Yibin | ST | Magnetron Sputtering of SBT Thin Films for Nonvolatile Memory Applications |
| Lia Maisarah Umar | MEng | Diagnostic techniques for PEM fuel cells |
| Liang Yijiong | ST | Value Analysis in Reverse Logistics Supply Chain |
| Liao Dongsheng | ST | Interactions between water-soluble polymers and cyclodextrins |
| Lim Tze Chiun | MEng | Rapid Cryogenic 3-D Plotting of Biopolymers with Controlled Macro-and Micro Poros Features - SUWA Project |
| Lim Chee Kian | PhD | Variable-reluctuance spherical motor for high-precision manipulation |
| Lim Ching Moi | ST | Flexibility analysis of product family architecture for amss customization: An approach based on real options |
| Lim Han Leong | ST | Universal Nanoparticle Synthesizer |
| Lim Kian Teck | MEng | Visual and Tactile Interface Development for Protein Interactions |
| Lim Yun Ping | MEng | Developing bioinformatics tools for the study of alternative splicing in eukaryotic genes |
| Liu Haobing | ST | Self-latching MEMS devices with moving polymer waveguids for optical telecommunication |
| Liu Jianhong | ST | Study on Drug Release from Hydrogels by Fluorescence Energy Transfer Method |
| Liu Lin | ST | Fabrication of 316L Stainless Steel Microstructures by UPIM and Surface Roughness Study |
| Liu Lixiang | MEng | Investigation of biochemical and electrochemical behaviour ofmulticomponent diamondlike carbon films |
| Liu Qinglin | ST | Development and Characterization of Gadolinia-Doped Ceria-based Intermediate Temperature Solid Oxide Fuel Cells |
| Liu Wei | ST | Geometric design of flat layout of 3D folded structures |
| Liu Xiang | ST | 3D Surface Characterization and Localization of Anatomical Landmarks |
| Liu Xiaopeng | ST | Gait planning and implementation for effective walking machines on various terran |
| Liu Yongping | ST | Blood flow interacting with cells |
| Liu Yuchan | MEng | Characterisation of Structural and Optical Properties of ZnO Thin films |
| Liu Yue | ST | Modeling of adsorption-based refrigeration systems |
| Liu Zengcai | ST | Investigation, fabrication and optimisation of polymer electrolyte membrance-electrode-assembly (MEA) |
| Loke Yee Chong | PhD | Bayesian approaches to clinical trial designs and pharmacokinetics |
| Low Soon Chiang | MEng | Development of robotic system to enhance therapeuctic GI endoscopic procedures |
| Low Tse Hoong | MEng | Design-for-reliability methodology for lead free solder joints |
| Lu Baifang | PhD | Developing a Protein Hierarchy Desk Using Vitual Reality Technology |
| Lu Fangfang | ST | Nonlinear dynamics and optimisation of track-suspension systems |
| Lu Yi | PhD | Optimization and characterization of piezoelectric multiplayer microstructures with applications in microactuators and microsensors |
| Luo Cheng | ST | Nonlinear Standing Waves in Miniature Acoustical Resonators and Application in Acoustical Compressors |
| Luo Zhiqiang | ST | Developing navigation aids for virtual reality, augmented reality & teleoperation systems |
| Lv Xin | ST | Computational Modeling of Fluid-Structure Interaction and Aero-elastic Instability in Hard Disk Drives |
| Ma Jian | ST | Development of Collaborative Design Environment Using Advanced Display Technology |
| Ma Koon Shiong | ST | Bio-Batteries for Implantable Devices |
| Ma Tingquan | MEng | Simulation and Optimisation of Mesoscale Bare Tube Heat Exchangers |
| Ma Yun | MEng | Computer Representation and Unfolding of 3D Folded Structures |
| Mak Kin Weng | ST | Design of CAD system for pop-up books |
| Marcos Marcos | MEng | Electrokinetic Effects in Closed Microchannels |
| Mark Chee Kong | MEng | Fatigue of welded joints in ultrahigh strength steels |
| May Win Naing | PhD | Design and validation of a tissue engineering scaffold library for in vitro and in vivo applications |
| Meenakshi Sundaram Murali | ST | Ultra precision finishing for micro and meso components |
| Mohammed Ashraf | MEng | Micromachined optical pick-up unit with polymer optics |
| Murshed S M Sohel | ST | Heat transfer characteristics of nanofluids |
| Mustafa Sharbbir Kurbanhusen | ST | Dexterous Wearable Haptic Arm for Robotic Rehabilitation |
| Nah Siew Kuan | MEng | Design of a Microgripper for Manipulation of Micro-parts and Biological Cells |
| Narayanan Unni Harikrishnan | ST | Electrokinetic mixing in microfluidics and implications for biomems: numerical simulation and experimental investigation |
| Nemeli Ganesha Mudaliar S | ST | Defect Pattern Detection Using a New Rule-Based Approach |
| Neo Hoon Kang | MEng | Collaborative Virtual Environment Using Grid |
| Neo Tien Song Paul | PhD | Advanced approaches to fuel cell system performance and condition monitoring |
| Ng Hong Wan | PhD | Modeling and analytical of the human cervical spine |
| Ng Tsong Jye | ST | Optimization of Intelligent Distributed Manufacturing System |
| Ng Wan Kee | MEng | Computational modelling of biopotential fields in the female breast with and without tumour |
| Ngoh Shwu Lan | ST | Study of microstructures and mechanical properties of lead-free solder joints (3rd sup: Dr Shi Xunqing, SIMTech) |
| Ong Kai Wei | ST | Collective behaviour of agents through perception, communication, planning and learning |
| Ong Soon Eng | MEng | Development of Diamond-like Carbon for Bio-MEMS Applications |
| Ong Wey Feng | MEng | Bio-engineered Cruciate Ligament Repair |
| Ooi Ean Tat | ST | A Petrov-Galerkin Finite Element Formulation to Combat Mesh Distortion Effects and its Applications to Finite Deformation Problems |
| Oratti Kalandar Navas Khan | MEng | Study of Pool Boiling Enhancement Structures and Development of Thermosyphon Loop for Electronics Cooling |
| Pedamallu Chandra Sekhar | ST | New solution methodologies for unconstrained optimization |
| Pham Cong Bang | ST | Analysis and design of cable driven parallel kinematic mechanisms |
| Philips Laulia | MEng | A Novel Method of Fabrication of Biodegradable Microparticles for DNA Delivery |
| Prasenjit Rath | ST | Laser Assisted Chemical Etching |
| Prochazka Zdenek(Nick) | ST | Mechanical evaluation of functionally graded plasma sprayed deposits |
| Qi Chao | ST | Dynamic job release control in semiconductor manufacturing using control theoretical approach |
| Qian Haixia | ST | Formation of Microscale and Nanoscale Structures on Surface Irradiated with Energetic Beams |
| Qiu Yuanfu | ST | Development of a Methodology to Support Virtual Team Decision Making in New Product Development |
| Ramachandran Kannan | ST | Integrated Top-down and Bottom-up Approaches in Power Generation Planning Using Lift Cycle Based Evaluation |
| Rao Zhiming | ST | Conceptual Design Evolution and Evaluation Strategy in New Product Development |
| Ratmin Ahmad Khairyanto | MEng | A Software to Explore Optimal Solutions to a Class of Layout Problems in Manufacturing/Assembly Design Using Bi-level Optimisation |
| Ren Yingtao | ST | Classification of Risk and Uncertainty, Risk Response and Contingency Planning in Multiple Project Risk Mangement |
| Ren Yu | ST | Mechanics of carbon nanotube based composites |
| Ren Yunxia | ST | Development of computational multiscale method for nanoscience modelling |
| Rinaldo Christian Tanumara | ST | Natural Text Understanding for Robot Intelligence |
| Romyaldy Romyaldy | PhD | A self recoverable humanoid prototype |
| Rosemary R Seva | ST | Human Factors Consideration for Information Visualization |
| Shamsuzzaman Mohammad | ST | Integrated Control Chart System |
| Shen Jinye | ST | Patterning of living cells using three-dimensional micropatterned biocompatible or biogradable polymeric substrate |
| Shi Baojun | ST | Simulation of the Drop Test of the Computer Hard Disk Drives |
| Sienny Wijaya | MEng | Development of Mechatronic I-D Strain Bioreactor for Tissue-engineering Esophagus |
| Singh Aditya | MEng | Design and Development of Digital Image Processing Technique for Latent Fingerprint Enhancement and Separation |
| Singh Vijay Raj | ST | Dynamic Micro-measurement |
| Song Guoliang | ST | Numerical Simulation and Measurements of a Heart Pump |
| Su Jincai | ST | Modelling and development of carbon molecular sieve membrane for gas separation |
| Su Li | ST | Computational Biophysics for Protein Structure Modeling |
| Sun Deen | ST | Strengthen mechanisms of magnetron sputtered nanocomposite coating |
| Sun Jianbo | ST | Development of Biomedical MEMS devices |
| Sun Yaofeng | ST | Digital image correlation technique for micro-and nano-interconnect reliability study |
| Sun Yuyang | ST | Development of Micro-optical Elements Based Optical Traps |
| Swandito Swandito | MEng | A novel bio-mechnatronic approach to image-guided non-invasive surgery under hybrid supervisory control |
| Tan Boon Kee | MEng | Active slider technology for fly-contact recording |
| Tan Boon Teoh | MEng | Site-specific nanoscale characterisation using focused Ion beam technology |
| Tan Chin Boon | ST | Characterisation of alignment and patterning scheme for DUV lithography |
| Tan Kok Chuen | MEng | Studies on graph theory and markov system based on simulation modeling of closed systems of roads |
| Tan Li Sin Angela | MEng | Design of operator work station in petroleum industry |
| Tan Ming Adin | MEng | Biomechanics of Finger Pulleys |
| Tan Pang Kern Jeremy | MEng | Novel Cross-Lined Microgel Particles for Environmentally Friendly Coating and Biomedical Applications |
| Tan Swee Tiong | PhD | Numerical investigation of pressure-driven developing flow and heat transfer through microchannels |
| Tan Tong Tat | ST | Fabrication of nanoscale structures using ultra-short laser |
| Tan Yu En | MEng | Development of a SWRO pressure recovery device |
| Tang Gongyue | ST | Thermal aspects of electrokinetic flow and capillary electrophoresis in microchannel network |
| Tang Xueyan | ST | Development of Adaptive Control Algorithms for a Micro Robot |
| Tang Zhizhong | ST | Deposition and Characterization of Nanocrystalline (Ta-Zr)N Thin Films used as Cu/Si Diffusion Barriers |
| Tanu Suryadi Kustandi | ST | Submicron Gecko Mimicking Adhesive Structures |
| Tee Tong Yan | PhD | Package and board level reliability modeling of advanced CSP packages for telecommunication applications |
| Teh Huey Fang | ST | Development and application of new microfabricated biosensors |
| Teh Yong Liang | ST | Development of a novel rotary compressor |
| Teo Tat Joo | ST | Micro-Positioning/ Precision Motion Control Methodology for Electromagnetically Driven Multiple-Degree-of Freedom Flexure-Based Parallel-Kinematics Positioners |
| Teu Koon Kiat | MEng | A Three Dimensional Kinematics Method for Determining the Effectiveness of Arm Segment Rotations in Producing Club Head Speed |
| Than Tun Naing | ST | Bubble Transport, Breakup and Coalesence in a Microchannel Using External Electric Field |
| Tjandra Williana | ST | Development of nanostructured materials using block-copolymer templates |
| Tong Yunxiang | ST | Developing High Temperature Shape Memory Alloy Thin Films for MEMS Applications |
| Vinay Sonu Sawant | ST | Development of a home ultrasound system |
| Wada Kiyohide | ST | Performance prediction of shape memory materials and its application |
| Wai Leong Yeo | ST | Haptic interface development and sensor integration for Exoskeleton |
| Wang Cheng | MEng | Flow in Micro-channel with Electrokinetic Effect |
| Wang Chunmei | ST | Mechanical and electrical properties of Ta-Cu-N nanocomposite coating |
| Wang Chunqi | MEng | Study of Vibration Transmission in Hard Disk Drive for Ultra High Track Density |
| Wang Deyang | ST | Characteriszing Material Properties and Monitoring Structural Integrity Using Acoustical Excitation |
| Wang Heng | ST | Design, development and control of a device for haptic sensing |
| Wang Huyi | ST | Mechanics of Defects in Multilayered Materials |
| Wang Jianbin | ST | Nanoparticle Transport and Deposition in a Bifurcation Bronchial Airway Model |
| Wang Nianfeng | ST | Design of Compliant Mechanisms/Actuators by Structural Optimization Using Genetic Algorithms |
| Wang Peng | ST | The effects of scarfing to the mixing performances of a lobed forced mixer |
| Wang Penghui | ST | Adaptive control charts |
| Wang Pin | ST | Investigation on the Tuning Methodologies for Tunable Diode Laser |
| Wang Qiongbo | ST | Study of ultrasonic transducers in medical applications |
| Wang Qiqiang | ST | Advanced plymer materials |
| Wang Rui | ST | Design for Process Planning: Sheet Metal Forming |
| Wang Sim Kit | ST | Direct Shallow Trench Isolation Chemical Mechanical Planarization with Ceria Based Slurry |
| Wang Wei | ST | Development of cathodic materials for intermediate temperature solid oxide fuel cells |
| Wang Xin | ST | Development of software to interpretate digital radiographs |
| Wang Yong | ST | 3D-Resconstruction and Computational Fluid Dynamics of Cochlea |
| Wang Yongsheng | ST | Sol-gel Synthesis of Ultra-high Adhesion Strength Hydroxyapatite Films for Biological Application |
| Wang Yuqi | ST | Physical and cushioning performance of product/package interaction subject to drop impact |
| Wang Zhiying | ST | Debinding of Powder Injection Molding Compact |
| Wei Feng | ST | Effects of electrical stimulation on tendon healing |
| Wong Chee Khuen Stephen | ST | Development of Flip Chip Composite Interconnection System |
| Wu Jie | ST | Fabrication and Testing of Micro-Bearings with Oscillatory Actuation Based on MEMS Technology |
| Wu Lixiao | ST | Modelling and characterisation of chemical mechanical polishing process |
| Wu Mingjie | ST | Shape memory alloy for optical MEMS application |
| Wu Xiaojun | ST | Develop a learning system for an industrial robot using genetic algorithm |
| Wu Yong | ST | Image re-construction techniques in global optimization |
| Xi Zhimin | ST | Integrating Scanning Probe Microscopy with a Parallel Kinematic Nanopositioning System |
| Xia Guohua | ST | Computer modeling of complex congenital heart disease |
| Xie Jin | ST | A Micro-cantilever Sensor for Acoustical Measurement |
| Xiong Fangli | ST | Assessment and improvement of coronary artery bypass grafting (CABG): Right coronary artery (RCA) |
| Xiong Feng | ST | Investigation of the mechanisms and properties of ferromagnetic shape memory materials |
| Xiong Jun | ST | Supply chain inventory management: modeling and analysis |
| Xu Dongjie | ST | Sputtering deposition of hydroxyapatite |
| Xu Guolin | ST | High Sensitive Fully Integrated Polymer Based DNA Diagnostic Biochip |
| Xu Jianhong | ST | Modelling of Transport Phenomena in Proton-Exchange-Membrane Fuel cell |
| Xu Jinling | ST | Nano-bioceramics: process routes and characterisation |
| Xu Lin | ST | Underwater lidar-based imaging system (ULIS) |
| Xu Luhua | ST | Investigation on Interconnection Failures in Micro-systems Packaging |
| Yan Deguang | ST | Electrokinetic Flow: Characterization, Control, and Application in Microfludic Systems |
| Yan Jie | ST | Micromechanics investigation on defects in piezoelectric solids |
| Yan Kaiguo | ST | Active Needling for Percutaneous Surgery |
| Yan Liang | ST | Modeling and control of 3DOF spherical motors for high-precision manipulation |
| Yang Bin | ST | Electrical Conductive Polyurethane Shape Memory Polymer |
| Yang Kai | ST | Influence of cage size on stability of cervical spine in cadaver |
| Yang Yongbo | ST | Material Development and Rheology Study of MR Fluids - Experimental and Theoretical Approaches |
| Yap Chun Wee | MEng | Stability of laminated cmposites with delaminations |
| Yap Yi-Lwern Kevin | MEng | Novel Rapid System for Quality Control of Pharmaceuticals |
| Yap Yit Fatt | ST | Two-Phase Liquid Coling of Advanced Electronics |
| Yeak Su Hoe | ST | Parallel Computation of Meshfree Method for Modeling and Simulation of Engineering Structures |
| Yeong Wai Yee | ST | Development of Pre-defined Morphology Scaffolds using Indirect Rapid Prototyping Techniques |
| Yi Wei | ST | Models and Solutions for Emergency Logistics |
| Yin Xiaofeng | PhD | Investigation of a Hierarchical Model for Supply Chain Coordination and Optimisaiton |
| Yong Kian Yan | MEng | DNA sequence analysis |
| You Xiao | ST | Negotiation Mechanisms for Electronic Contracting in Multi-Site Manufacturing Supply Chains |
| Yu Yiting | ST | Prokarotic domain fusion in the human genome: A roadmap for alternative splicing |
| Yuan Yanhui | ST | Development of MEMS Contact Force Sensors for Magnetic Head Sliders |
| Zhang Baili | ST | Immersed Boundary Method on Unstructured Grid for Modeling Elastic Membrance Immersed in Fluid |
| Zhang Bingru | ST | A hybrid meshfree-evolutionary algorithm for elasticity problems |
| Zhang Dongsheng | ST | Development of a left ventricular assist device |
| Zhang Honglin | ST | Experimental and Numerical Investigations into Micro Molding |
| Zhang Hongxia | ST | Stress Investigation on Interacting Defects in Advanced Materials |
| Zhang Hongye | ST | Design and fabrication of a new ultrasonic device and its application for drug delivery |
| Zhang Jun | ST | Fabrication of high aspect ratio micromold by photolithography and electroforming |
| Zhang Lianfeng | ST | Variety Synchronization for Mass Customization in Product-Process Platform |
| Zhang Weifeng | ST | Application of yield management techniques to supply chain capacity planning |
| Zhang Yali | ST | Electro-kinetic Phenomenon in Microstructures |
| Zhang Yanlie | ST | Reliability study on polymer/inorganic interface in microelectronic packaging |
| Zhang Yiyang | ST | Modeling customer preference for customization process |
| Zhao Bing | ST | Towards peptide vaccine design |
| Zhen Yong Da | ST | Investigation and development of protective coatings for metallic interconnect of solid oxide fuel cells |
| Zheng Zuwei | ST | Adhesion mechanics of thin films |
| Zhou Kun | ST | Mechanics of Disclinated Interfaces and Cracks in Polycrystalline and Nanocrystalline Materials |
| Zhou Wenxiu | ST | Large area and high aspect ratio UV embossing for diverse applications |
| Zhu Han | ST | Nanoscale and microscale fluid mechanics |
| Zhu Jun | ST | Finite Element Model Updating of Micro-systems Using Vibration Test Data |
| Zhu Xuejun | ST | Superplasticity and forming of Ti-6Al-4V alloy |
| Zou Hongliu | ST | Capturing of 3D models from 2D design sketches |
| Zou Xuxia | ST | Supply contract modeling for a supply chain system |
| Footnote: | ||
| ST - Research Student (PhD) |