Home > Professional Development Courses >

 

Accounts/Business/HRM | Communication Skills | Education | Engineering | IT & Information Studies | Personal Development

 

 

WSQ Geometric Dimensioning & Tolerancing (PDU)(SFC)(WSQ) 

Introduction

Today, engineering drawings are used to define or describe most manufactured parts. In each of these parts, tolerances are specified to cater for the variations encountered in the manufacturing process. This is to ensure that acceptable levels of variation and quality for each geometric feature can be achieved when parts are assembled together to form an engineering product. As mechanical designs can be complex involving numerous parts and sub-assemblies, increasingly more firms are required to specify and interpret Geometric Dimensioning & Tolerancing (GD&T) symbols on these drawings so that better clarity and acceptance rates can be achieved. This course seeks to look at the GD&T language and its related symbols, its concepts and rules as well as to read, interpret and specify them so that greater technical and productivity can be achieved. 

Objectives

1. To learn the basic principles and building blocks of GD&T
2. To appreciate the merits of GD&T and how it complements conventional tolerancing methods
3. To be able to read, specify and interpret GD&T language
4. To apply GD&T for technical and economic competitive advantages

Underpinning Knowledge:
1. To know the definitions, concepts and rules of the GD&T language and its related symbols.
2. To read, interpret and specify the various GD&T symbols in the engineering drawings
3. To be exposed to the various gauging tools and techniques used to determine the intended geometric characteristic features.
 

Outline

Day 1
Understand and Use of Basic GD&T Concepts and Rules

Day 2
Understand, Specify, Interpret and Use of Datums and Form Control Symbols

Day 3
* Assessment 1
Understand, Specify, Interpret and Use of Orientation and Location Positional Symbols

Day 4
Understand, Specify, Interpret and Use of more Location Symbols, Runout and Profile Symbols

Day 5
Revision - Discussion and Clarifications
* Assessment 2

WDA Certification
Upon completion and passing of all required assessments, participants will receive a formal recognition through the award of a Statement of Attainment (SOA) from the Singapore Workforce Development Agency (WDA).

Criteria for WSQ Funding and Certification
To be eligible, participants:
- must be Singaporeans or Permanent Residents of Singapore
- may be employer-sponsored, self-sponsored or unemployed
- achieve 75% attendance
- pass all required assessments, or face a re-test within 2 weeks after the last day of the course.
- eligibility acceptance subject to final approval by WDA before course commencement
*Participants who do not fulfill the above criteria are not eligible for WSQ funding & certification, and are required to pay the course fee in full.

Absentee Payroll Grant
With effect from 1 Jul 2010, all Absentee Payroll Grants will be applicable via the SkillsConnect system.  

Trainer(s)

Professor Lye, Sun Woh

Sun-Woh Lye, PhD, FIES, is currently a professor from the School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore. He has taught for more than 20 years at both undergraduate and graduate levels relating to design and manufacturing modules such as Design Optimisation and Analysis, Computer Aided Design, Engineering, Advanced Product Design for Manufacture, Virtual Design for Manufacture, Industrial Design, Machining and Process Engineering. He is also active in conducting of professional engineering courses as well as served as consultant at both project advisory and development roles to companies in his area of expertise. Besides teaching, he had held administrative positions in overseeing of graduate and research programmes, fostering research projects and funding, transfer and commercialisation of technological innovations.

Who Should Attend

Personnel who need to read engineering drawings. Relevant occupations include:
Engineering Managers
Product Designers
Process and Tooling Engineers and Technical Personnel
Quality Control Inspectors
Procurement Personnel

Fee payable table (subject to WDA's approval and Terms & Conditions Applies)
Sponsorship/Fees* (SG/SPR) ETSS MCES WTS
Company sponsored $1252.35 $272.85 $272.85 $192.60
Self sponsored $1252.35td> NA $272.85 $192.60
 

Details

Date(s):

11, 12, 14, 15 and 18 December 2017 

Time:

9:00am to 5:00pm 

Venue:

NTU@one-north campus, Executive Centre 

Closing Date:

27 November 2017 

Course Fee:

Standard: S$1717.35  

NTU/NIE Alumni, Staff & Students: S$1717.35  

Group (3 & Above): S$1717.35

NTUC Member: S$1717.35

 

Registration fees inclusive of:

  • Course materials

  • Light refreshments

  • Complimentary Lunch - applicable at NTU@one-north campus only

  • Prevailing GST

Online Registration

>> CLICK HERE to Register Online

 

Methods of Payment

1. Credit Card (Visa, American Express and Mastercard only)

2. Cheque made payable to Nanyang Technological University

3. Invoice to Company (for Company Sponsored Participants)

4. E-invoice (for Government Organizations)

5. Telegraphic Transfer or Bank Draft (Note: All related charges are to be borne by participant)

Cancellation & Refund Policy

A written notification to copace@ntu.edu.sg or fax to

6774 2911 before course closing date.

No cancellation charges (Full refund)

 

 

A written notification on or after course closing date.
 

No Refund

SkillsFuture Credit (if applicable):
- Participant to cancel their claim with WDA
- PaCE Collegereserves the rights to collect the full fee amount from the participant

Replacement Policy

Given a 3 days notice before course commencement, companies may replace participants who have signed up for the course. Terms and conditions apply.

 

There is no replacement for participant utilising SkillsFuture Credit. Participant to cancel their SkillsFuture Credit claim with WDA.

Terms and Conditions

• Course is subject to a minimum participation before commencement
• Course is subject to a first-come-first-serve basis in light of overwhelming responses
• PaCE Collegereserves the right to change or cancel any course or trainer, in light of unforeseen circumstances
• All details are correct at time of dissemination

Privacy Clauses

At PaCE College, participants’ personal information is collected, used and disclosed for the following purposes:
  1. To process your application.
  2. For course administration and billing.
  3. To enable the trainers to know the background of the course participants.
  4. To submit to governmental authorities for funding verification, administration and survey conducted by them (only applicable to funded courses).
  5. To submit to NTU Alumni Affairs Office, NTUC and other relevant organisations for course discount verification (if applicable).
  6. To issue certificate to the course participants.
  7. For marketing of courses to participants via E-newsletter.
  8. To understand and study the profile of its course participants for NTU’s policy making and planning.
  9. To deal with any matter related to the course.
Full Data Protection and Privacy Statement : CLICK HERE  

 

 

Accounts/Business/HRM | Communication Skills | Education | Engineering | IT & Information Studies | Personal Development

 

 

© Nanyang Technological University - Centre for Continuing Education

Copyright | Disclaimer | Privacy Statement

Reg. No. 200604393R