Home > Professional Development Courses >

 

Accounts/Business/HRM | Communication Skills | Education | Engineering | IT & Information Studies | Personal Development

 

 

Basic Orthopaedic Biomechanics - Part II (CME)(SFC) 

Introduction

This annual Basic Orthopaedic Biomechanics course started in year 2004 in conjunction with the Orthopaedic Advance Surgical Training Syllabus in Singapore. Starting in year 2009, this course is conducted in two parts. Orthopaedic trainees should take Part 1 and Part 2 on different years. Part 1 consists of bone mechanics, upper and lower limb mechanics and practical sessions. Part 2 consists of revision, spine mechanics, soft tissue and practical sessions. 

Objectives

The objective of this course is to allow participants to understand the biomechanics of bone and joints. With the appreciation of the engineering aspects of biomechanics, participants will be equipped to initiate research projects that interest them. 

Outline

Day 1: (full day, 0900 to 1700hrs)
* Precourse Assessment
* Revision of Part I
* Soft Tissue Mechanics
* Gait Analysis
* Practical

Day 2: (half day, 0900 to 1200hrs)
* Biomechanics of Spine
* Tribology

Note:
- This course is accredited with CME credits, awarded by the Singapore Medical Council
- Lunch is provided for Day 1 only
 

Trainer(s)

Adjunct Associate Professor Lie Tjiauw Tjoen, Denny

Dr. Lie Tjiauw Tjoen Denny, is currently a Consultant in the Department of Orthopaedic Surgery, Singapore General Hospital.

He is also an Adjunct Associate Professor, School of Mechanical and Aerospace Engineering, Nanyang Technological University, since Sept 2006 and Co-Director, MSc (Biomedical Engineering) programme, Nanyang Technological University, since 2005.

His research interests include rotator cuff strain studies, orthopaedics biomechanics, ACL reconstruction, meniscus repair and menisectomy, osteoporosis.

Associate Professor Chou, Siaw Meng

Dr. Chou SM obtained his BEng (Hons) and PhD in 1988 and 1992, respectively, from the University of Strathclyde, Scotland, UK. He is currently an Associate Professor in the Division of Engineering Mechanics at the School of Mechanical & Aerospace Engineering (MAE) in Nanyang Technological University (NTU), Singapore. He currently teaches "Mechanics of Materials" at the undergraduate level and has taught "Biomechanics" to Master of Science (Biomedical Engineering) students from year 2000 to 2010.

His research interests include biomechanics of bones, tendons, joints and implants. Dr Chou has been involved in the organisation of Orthopaedic Biomechanics Course in conjunction with the Orthopaedic Advance Surgical Training Syllabus, together with SGH and NUH, from 1999 to 2003. He was the director of the MSc (Biomedical Engineering) programme at MAE, NTU from year 2000 to 2011.

Dr Yew, Andy

Dr Andy Yew is currently a research scientist with the Department of Orthopaedic Surgery at Singapore General Hospital. After graduating with a B.Eng (1st Class Honours) in Mechanical Engineering at University of Bradford in 2000, he obtained his PhD in Mechanical Engineering in 2004 with his study on contact mechanics and lubrication study of metal-on-metal hip implants. His research interests include biomechanics, contact mechanics, motion analyses, finite element modelling, and bioimaging.

Who Should Attend

All interested medical support staff, orthopaedic clinicians and engineers.

Criteria:
1. Trainees must attend Part I before attending Part II.
2. Trainees cannot attend both parts in the same calendar year, unless with prior permission from the Professor or the Singapore Medical Council.

Course supported for the new Union Training Assistance Programme (UTAP) funding

Union members may enjoy up to $250 unfunded course fee support when you sign up for courses supported under UTAP. Conditions apply. Visit www.ntuc.org.sg for more information.  

Details

Date(s):

21 to 22 July 2017 

Time:

9:00am to 5:00pm 

Venue:

School of Mechanical and Aerospace Engineering (MAE), Nanyang Technological University 

Closing Date:

7 July 2017 

Course Fee:

Standard: S$449.40  

NTU/NIE Alumni, Staff & Students: S$359.52  

Group (3 & Above): S$404.46

NTUC Member: S$404.46

 

Registration fees inclusive of:

  • Course materials

  • Light refreshments

  • Complimentary Lunch - applicable at NTU@one-north campus only

  • Prevailing GST

Online Registration

>> CLICK HERE to Register Online

 

Methods of Payment

1. Credit Card (Visa, American Express and Mastercard only)

2. Cheque made payable to Nanyang Technological University

3. Invoice to Company (for Company Sponsored Participants)

4. E-invoice (for Government Organizations)

5. Telegraphic Transfer or Bank Draft (Note: All related charges are to be borne by participant)

Cancellation & Refund Policy

A written notification to cce@ntu.edu.sg or fax to

6774 2911 before course closing date.

No cancellation charges (Full refund)

 

 

A written notification on or after course closing date.
 

No Refund

SkillsFuture Credit (if applicable):
- Participant to cancel their claim with WDA
- NTU-CCE reserves the rights to collect the full fee amount from the participant

Replacement Policy

Given a 3 days notice before course commencement, companies may replace participants who have signed up for the course. Terms and conditions apply.

 

There is no replacement for participant utilising SkillsFuture Credit. Participant to cancel their SkillsFuture Credit claim with WDA.

Terms and Conditions

• Course is subject to a minimum participation before commencement
• Course is subject to a first-come-first-serve basis in light of overwhelming responses
• NTU-CCE reserves the right to change or cancel any course or trainer, in light of unforeseen circumstances
• All details are correct at time of dissemination

Privacy Clauses

At NTU-CCE, participants’ personal information is collected, used and disclosed for the following purposes:
  1. To process your application.
  2. For course administration and billing.
  3. To enable the trainers to know the background of the course participants.
  4. To submit to governmental authorities for funding verification, administration and survey conducted by them (only applicable to funded courses).
  5. To submit to NTU Alumni Affairs Office, NTUC and other relevant organisations for course discount verification (if applicable).
  6. To issue certificate to the course participants.
  7. For marketing of courses to participants via E-newsletter.
  8. To understand and study the profile of its course participants for NTU’s policy making and planning.
  9. To deal with any matter related to the course.
Full Data Protection and Privacy Statement : CLICK HERE  

 

 

Accounts/Business/HRM | Communication Skills | Education | Engineering | IT & Information Studies | Personal Development

 

 

© Nanyang Technological University - Centre for Continuing Education

Copyright | Disclaimer | Privacy Statement

Reg. No. 200604393R