Home > Professional Development Courses >

 

Accounts/Business/HRM | Communication Skills | Education | Engineering | IT & Information Studies | Personal Development

 

 

WSQ Design for Assembly in Manufacturing (SFC)(PDU)(WSQ) 

Introduction

Best-selling products are innovative, satisfy customer needs, are of high quality and are value for money. Under-pinning a best-selling product are ease of manufacture and assembly. Typically 53% of all manufacturing time is due to assembly while 75% of the cost of a manufactured product is determined at the design stage. It is therefore imperative to learn about the underlying principles of design for ease of assembly.

The course is designed for technical personnel in design, manufacturing, process and quality control. After the course, participants can appreciate the underlying principles and rules for manufacturing a high quality, cost-effective product.

The objective of the course is to teach the principles and techniques to design for ease of assembly

Objectives

1. To learn the basic principles of design for assembly
2. To be able to assess a design/product for ease of assembly
3. To improve on the design/product for easy of assembly

Underpinning Knowledge
1. Material properties.
2. Fabrication process capabilities.
3. Component/part design.
4. Basic design rules.
 

Outline

Day 1
Product and Process Design for Easy Assembly
• Introduction to assembly tasks, methods and systems.
• Understand the rules and axioms for the design of components for ease of assembly.
• Understand the rules and axioms for the design of assembly processes.
*Assessment 1

Day 2
Design for Manual Assembly
• Understand techniques and methods to assure fool-proof assembly
• Learn how to design for effective manual assembly
• Apply the DFMA Methodology to assess ease of manual assembly
*Assessment 2

Day 3
Design of Assembly Systems
• Learn how to design for high speed automatic assembly
• Understand the need to ‘balance’ an assembly line for equitable task allocation.
• Parts feeding and orienting: vibratory and non-vibratory, orienting devices; escapements. Robot assembly.

Day 4
*Assessment 3 and Revision

WDA Certification
Upon completion and passing of all required assessments, participants will receive a formal recognition through the award of a Statement of Attainment (SOA) from the Singapore Workforce Development Agency (WDA).

Criteria for WSQ Funding and Certification
To be eligible, participants:
- must be Singaporeans or Permanent Residents of Singapore
- may be employer-sponsored, self-sponsored or unemployed
- achieve 75% attendance
- pass all required assessments, or face a re-test within 2 weeks after the last day of the course.
- eligibility acceptance subject to final approval by WDA before course commencement
*Participants who do not fulfill the above criteria are not eligible for WSQ funding & certification, and are required to pay the course fee in full.

Absentee Payroll Grant
• With effect from 1 Jul 2010, all Absentee Payroll Grants will be applicable via the SkillsConnect system.  

Trainer(s)

Associate Professor Lee, Siang Guan Stephen

Dr Stephen S-G LEE is an associate professor and head of the manufacturing engineering division of the School of Mechanical & Aerospace Engineering, NTU. Dr Lee has many years of experience in design and manufacturing at senior management level. He taught and supervised projects involving Design for Assembly at the undergraduate level for several years.

His PhD research was in part design for automatic assembly but his current research interests are in product lifecycle management and dynamic enterprise collaboration.

Dr Lee is a registered professional engineer and a Fellow of the Society of Manufacturing Engineers. An active member of the SME since 1987, Dr Lee held senior appointments in the Singapore Chapter, culminating with the Chapter Chairmanship in 1990. In 1992, the Society of Manufacturing Engineers conferred on him its Award of Merit and in 1998, he was elected to its College of Fellows.

Who Should Attend

Relevant occupations include:

• Manufacturing engineers
• Product designers
• Quality control inspectors
• Process engineers
• Materials procurement executives


Fee payable table (subject to WDA's approval and Terms & Conditions Applies)
Sponsorship/Fees* (SG/SPR) ETSS MCES WTS
Company sponsored $1205.33 $258.23 $258.23 $182.28
Self sponsored $1205.33 NA $258.23 $182.28
 

Details

Date(s):

2, 3, 5 and 6 October 2017 

Time:

9:00am to 5:00pm 

Venue:

NTU@one-north campus, Executive Centre 

Closing Date:

18 September 2017 

Course Fee:

Standard: S$1625.33  

NTU/NIE Alumni, Staff & Students: S$1625.33  

Group (3 & Above): S$1625.33

NTUC Member: S$1625.33

 

Registration fees inclusive of:

  • Course materials

  • Light refreshments

  • Complimentary Lunch - applicable at NTU@one-north campus only

  • Prevailing GST

Online Registration

>> CLICK HERE to Register Online

 

Methods of Payment

1. Credit Card (Visa, American Express and Mastercard only)

2. Cheque made payable to Nanyang Technological University

3. Invoice to Company (for Company Sponsored Participants)

4. E-invoice (for Government Organizations)

5. Telegraphic Transfer or Bank Draft (Note: All related charges are to be borne by participant)

Cancellation & Refund Policy

A written notification to copace@ntu.edu.sg or fax to

6774 2911 before course closing date.

No cancellation charges (Full refund)

 

 

A written notification on or after course closing date.
 

No Refund

SkillsFuture Credit (if applicable):
- Participant to cancel their claim with WDA
- PaCE Collegereserves the rights to collect the full fee amount from the participant

Replacement Policy

Given a 3 days notice before course commencement, companies may replace participants who have signed up for the course. Terms and conditions apply.

 

There is no replacement for participant utilising SkillsFuture Credit. Participant to cancel their SkillsFuture Credit claim with WDA.

Terms and Conditions

• Course is subject to a minimum participation before commencement
• Course is subject to a first-come-first-serve basis in light of overwhelming responses
• PaCE Collegereserves the right to change or cancel any course or trainer, in light of unforeseen circumstances
• All details are correct at time of dissemination

Privacy Clauses

At PaCE College, participants’ personal information is collected, used and disclosed for the following purposes:
  1. To process your application.
  2. For course administration and billing.
  3. To enable the trainers to know the background of the course participants.
  4. To submit to governmental authorities for funding verification, administration and survey conducted by them (only applicable to funded courses).
  5. To submit to NTU Alumni Affairs Office, NTUC and other relevant organisations for course discount verification (if applicable).
  6. To issue certificate to the course participants.
  7. For marketing of courses to participants via E-newsletter.
  8. To understand and study the profile of its course participants for NTU’s policy making and planning.
  9. To deal with any matter related to the course.
Full Data Protection and Privacy Statement : CLICK HERE  

 

 

Accounts/Business/HRM | Communication Skills | Education | Engineering | IT & Information Studies | Personal Development

 

 

© Nanyang Technological University - Centre for Continuing Education

Copyright | Disclaimer | Privacy Statement

Reg. No. 200604393R